When it comes the braking system on vehicles, there are many components. While all these components seem daunting, the braking system is DIY friendly, especially the brake pads and rotors.
Brake pads and rotors are two components of the braking system that need changing the most. Brake pads tend to wear down due to the friction that they encounter when the drive presses on the brake pedal. If they wear down enough, they can wear grooves into the rotors which will mean replacing or turning the rotors as well.
When it is time to change your break pads, you don’t necessarily have to take the vehicle into the shop. A brake pad replacement is something that you can do yourself. While it may seem a little daunting, it is actually quite easy. Brake pads are easily accessible aren’t a hassle to change. They are the perfect maintenance item for a DIYer to tackle.
When brake rotors are damaged by worn brake pads or road debris, they will either need to be turned or replaced. Sometimes turning rotors will be sufficient enough smooth out the grooves within the brake rotors. If the rotors need turning, then the vehicle will have to be taken to a repair shop to have a mechanic turn the rotors. But, if they need changing, then it is a task that you could do yourself. There are no special tools that are needed and as long as you have a jack, they are easily accessible.
By changing the brake pad and rotors yourself, not only can you save tons of money, but you can also help to maintain the validity of your factory warranty and extended auto warranty if applicable. If something within the braking system fails due to the lack of maintenance of your brake pads and brake rotors, then your warranty may not cover the cost of repairs. So, if you are up for the task, then tackle the brake pads and brake rotors and maintain your Do it Yourself (DIY) status.